Back to Blog


Top Signs Your Anode Rod Needs Replacing in Des Moines Homes


When it comes to maintaining your water heater, few homeowners realize the critical role the anode rod plays in protecting the entire system. Tucked away inside your tank, this small metal rod works behind the scenes to prevent corrosion and extend the life of your water heater. But when it wears out often silently it can lead to rust, smelly water, and premature tank failure. That’s why knowing the signs your anode rod needs replacing is essential for every homeowner in Des Moines.

At Lazer Home Services, we’ve helped thousands of Des Moines residents with expert water heater maintenance and anode rod replacement to keep their systems running efficiently. In this blog, we’ll walk you through the top symptoms of a worn-out anode rod and why acting early can save you from bigger plumbing problems down the road.

Rotten Egg Smell Coming from Your Hot Water

One of the earliest and most unpleasant signs of a bad anode rod is a strong sulfur or “rotten egg” smell coming from your hot water taps. This smell is caused by bacteria reacting with the metal of the anode rod especially magnesium rods in areas with hard water, like Des Moines.

While it might seem like a water contamination issue, the solution is often as simple as replacing your anode rod with an aluminum-zinc alloy version. At Lazer Home Services, we offer zinc-based replacements that are better suited for Central Iowa’s mineral-rich water and help eliminate the odor fast.

Anode Rod Needs Replacing

Discolored or Rust-Tinted Water

Another red flag is rusty or tinted water, particularly when running hot water. Your anode rod is designed to corrode in place of your tank. But when it’s completely used up, your tank starts to rust, sending those orange or brown particles into your water lines. This is often mistaken for a failing tank, but it’s really your anode rod signaling that it’s time for attention.

If you notice this change, don’t wait for your tank to start leaking. Scheduling a quick inspection can confirm if an anode rod replacement is the fix and potentially add years of life to your water heater.

Visible Corrosion or Pitting Inside the Tank

Although the anode rod itself isn’t usually visible without removing it, signs of tank corrosion like pitting, flaking, or rust on the tank’s outlet can point directly to an exhausted anode rod. If your tank is more than five years old and hasn’t had a rod inspection, it’s time to act.

Our plumbers in Des Moines know what to look for and can quickly swap out your worn rod before it causes permanent tank damage.

Water Heater Making Popping or Rumbling Noises

If your water heater sounds like it’s boiling or popping inside, it could be due to sediment buildup a common issue when an anode rod fails to protect the tank. Sediment not only shortens your heater’s lifespan but also makes it work harder, driving up energy costs.

Anode Rod Needs Replacing

A professional flush and anode rod replacement by the experts at Lazer Home Services can restore quiet operation and improve system efficiency.

Water Takes Longer to Heat or Doesn’t Stay Hot

A failing anode rod can indirectly cause a drop in water temperature performance. When rust and sediment form due to rod degradation, it coats the tank’s heating elements, making them less effective. If your water doesn’t stay hot as long or takes too long to warm up it might be time for maintenance.

Don’t assume you need a new water heater. We often resolve these issues with simple, affordable component replacements.

Age of the Water Heater (5+ Years Old)

Even if you’re not experiencing symptoms yet, most anode rods need replacement every 3 to 5 years, depending on water quality and heater usage. In Des Moines, where hard water is a constant concern, rods can wear out faster.

If your tank is approaching the five-year mark, now is the ideal time to check and potentially replace the anode rod. It’s a small investment compared to the cost of a full repiping or water heater installation.

Areas We Proudly Serve in Des Moines and Central Iowa

At Lazer Home Services, we provide reliable anode rod replacement and water heater maintenance throughout the Des Moines metro and surrounding areas. Our service area includes Altoona, Ames, Ankeny, Bondurant, Carlisle, Clive, Grimes, Johnston, Norwalk, Pleasant Hill, Urbandale, Waukee, West Des Moines, Windsor Heights, and other Central Iowa communities. Wherever you’re located, our licensed plumbers are just a call away.

Anode Rod Needs Replacing

Why Choose Lazer Home Services for Anode Rod Needs Replacing in Des Moines

Choosing the right plumbing team can make the difference between a quick fix and a long-lasting solution. At Lazer Home Services, we’ve built our reputation in Des Moines by offering honest, efficient, and expert-level plumbing care. When it comes to something as essential as anode rod replacement, we go beyond the basics evaluating your entire water heater system to ensure it’s fully protected from corrosion and damage.

Our licensed technicians use only high-quality materials, including zinc and aluminum rods tailored to Des Moines’ water conditions. We’ll assess your water heater, explain what we find, and provide upfront pricing with no surprises. Whether it’s a routine inspection or an urgent repair, we treat your home like it’s our own because your comfort and peace of mind matter.

Conclusion: Don’t Wait for Damage, Replace Your Anode Rod Today

Anode rods may be small, but they do a big job. Ignoring their maintenance can lead to costly damage, premature water heater failure, and major plumbing issues. If your water smells odd, looks rusty, or your heater is older than five years, now is the time to act.

At Lazer Home Services, we make anode rod replacement in Des Moines easy, affordable, and reliable. Our team is here to help you extend the life of your system and avoid unexpected breakdowns. Schedule a water heater inspection today, and let’s make sure your home is protected for the long run.

Frequently Asked Questions

How often should I replace my anode rod in Des Moines?
Typically, every 3–5 years. Hard water can shorten the rod’s life, so Des Moines homes may need more frequent replacement.

What are the risks of not replacing the anode rod?
Corrosion, rust, water heater leaks, and complete tank failure. The anode rod is your first line of defense.

Can I check the anode rod myself?
It’s possible but not recommended unless you’re experienced. It requires shutting off the heater, unscrewing the rod, and checking it for corrosion. Our licensed plumbers can do this safely.

Does anode rod material matter?
Yes. Magnesium rods offer strong protection, but zinc-aluminum rods are better for fighting odors in areas with hard water, like Des Moines.

Do you offer anode rod services outside Des Moines?
Yes! We serve nearby communities such as Ankeny, Urbandale, Clive, Waukee, West Des Moines, Altoona, and many more.